According to the size of the object to be bound, it can be cut to any desired length, equipped with stainless steel buckles, and quickly installed with the corresponding strap tightening machine, which is safe, fast and reliable.Material: cast steelSuitable for width of band strap: 9.5-25.0mm Suitable for thickness of band strap: 0.8-1.0mmSurface treatment: sprayed, chrome platedOur tension tool for SS strapping band with the advantages below: 1.It has a wide range of applications and multiple uses.
Contacta ahora
The stainless steel strip is made by further cold rolling. Compared with hot-rolled strip, it has higher dimensional accuracy, low surface roughness, good surface quality, smoothness, and higher strength.FEATURES-Tensile strength: 600 N / mm2-Yield strength: 275 N / mm2-Elongation (break): 40%-Temperature: -60°C up to +60°C-Standard: AISI 201Measures:-Width: 19mm-Thickness: 0.7mm-Length: 30 m.
Contacta ahora
The tie strap is used for tying 11kV or 33kV cross-arms to poles. There are steel galvanized bolts and nuts assembled. All ferrous part is made in hot dip galvanized.
Contacta ahora
Our clamp tool for SS banding strap with the advantages below: 1.It has a wide range of applications and multiple uses. It can be used to bundle cables, pipes, signs, brackets, etc. 2.As a packing tool, it saves time and effort, is convenient to tighten, the card slot is fixed, and it is easy to cut. 3.Comfortable handle, easy to operate, thick plastic powder, wear-resistant, suitable for complex operating environment. 4.Die design, sturdy and durable. Forged with high-strength tool steel, strong and durable. 5.Simple operation and convenient installation.
Contacta ahora
The transformer bracing cross arm is the cross of dimension of 550x50x50x6mm。The cross arm is hot dipped galvanized.All steel members and other parts of fabricated material as delivered is free of warps, local deformation.Bending of flat strap is carried out cold.About surface treatment:All galvanizing is carried out by the hot dip process. The zinc coating is smooth, continuous and uniform. It is free from acid spot and shall not scale, blister or be removable by handling or packing.
Contacta ahora
Steel belt 20X0.7mm with buckle, tts strength and ductility meet requirements for bending the different size of cables on poles. Steel Buckle can hold a single or double wrapped band configuration.Packing:Steel roll of 50 m is packed in form of closed reel rewind tape in nylon plastic roll.
Contacta ahora
Hot-rolled steel strip or steel plate is used as raw material and rolled into a product by a cold rolling mill at room temperature.1.Standard: GB4239-84 2.Features: good surface quality and smooth 3.Billet: Hot-rolled stainless steel strip4.The thickness of cold-rolled steel strip is 0.1~3mm, such as: 0.30, 0.40, 0.50, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 2.00, 2.50, 3.00mm.The surplus cable rack is used to suspend and fix the surplus OPGW optical cable and ADSS optical cable on the tower in the overhead line for maintenance and inspection. 1.The remaining cable rack for po
Contacta ahora
All Well tension anchor clamp made of mild steel, excellent tensile properties, good resistance to oxidation and corrosive agents, which allows their use in environments where high resistance to corrosion is required, to fix pole, cable etc. Features:- Reduces installation costs and time- For 12-20mm band strap- Reduced materials costs- Unique design, better performance- Temperature: -10°C up to +70°C Measures:- The diameter of ADSS: 8-12mm- Dimension: 65×65×54mm(L×W×H)- Unit weight: 115 gramInstallation image:
Contacta ahora
The pole hoop is used to connect the tension suspension clamp and the electric pole.The cable hoop is a cable in the line to fix the pole. There are flat hoop, reinforced flat hoop, double hoop hoop and four hoop hoop. Generally, the specifications of flat steel and the diameter of the rods to be held are used to express its specifications, such as 60×6×150. Features: 1.
Contacta ahora
Material: steelFinish: hot dip galvanized ASTM A123. Usage: pole accessories Type: heavy duty. The cable hoop is a cable in the line to fix the pole. There are flat hoop, reinforced flat hoop, double hoop hoop and four hoop hoop. Generally, the specifications of flat steel and the diameter of the rods to be held are used to express its specifications, such as 60×6×150. Features: 1.
Contacta ahora
The stainless steel buckle with tooth-shaped serrations and a certain arc on the back, which Bundle cables and signs can provide the greatest bundling strength. Features:-Buckles with rounded edges-With a toothed cavity for better grip of the steel tape-Flat body for fastening to the steel tape-With fins for maximum tension and fixed and secure grip of the steel tape-The buckle is for ¾-inch steel strapping tape.Packaging:The buckles packaging in plastic bags of 100 units and these in turn in cardboard boxes adequately protected against damage or humidity, with the requested customer info
Contacta ahora
The surplus cable rack is used to suspend and fix the surplus OPGW optical cable and ADSS optical cable on the tower in the overhead line for maintenance and inspection. 1.The remaining cable rack for poles is fixed on the poles by two sets of steel band hoops 2. The remaining cable frame for the tower is fixed on the iron tower angle steel by two sets of right-angle splints.Purpose: It is used to place the surplus optical cable when the optical cable is connected.
Contacta ahora
The multipurpose pole clamp is fabricated from structural steel grade 235 and is hot dipped galvanized. The tensile strength of the multipurpose pole clamp is not less than 70KN for the light duty clamps and 120KN for the heavy duty clamps respectively. The clamps is supplied complete with bolts, locking nut, flat washer and spring washer for main or rib line.Cutting and surface1. The cutting is by cold process while bending and shaping is by hot forging. It is capable of being re-flattened without fracture.
Contacta ahora
FTTH accessories: fiber to the home wiring, steel band hoop used to lock the device on the pole. Scope of application: 130-240mm. Features: 1.Wide range of applications, torsion resistance and pressure resistance, balanced torsion torque, firm and tight locking, and large adjustment range. 2.Put it on the telegraph pole, tighten and fix it. 3.
Contacta ahora
Galvanized steel pole top make off is generally double wrapped around the pole. 3 strands plus king wire and effective 7 strand stay length for dead end attachment. top to facilitate termination of the stay strand that firms the pole on the earth.Features:1. Material: galvanized steel wire2. Application: for stay rod assembly3. Dimension: 1750 overall length mm4. Finish: hot dip galvanized5. Stay wire diameter: 12mm6. Tensile strength” 63kNProduction drawing: Installation image:
Contacta ahora
The down-lead clamp for metal rods is used to fix ADSS on the rod. It is suitable for different cable diameters. It is convenient and reliable to install and has a wide adjustable range.1.Function: Fix the optical cable leading up or down on the pole tower to prevent it from shaking and avoid the optical cable from wearing. 2.Condition: The fiber optic cable line and the continuous poles on the first and end poles. 3.Method: usually install one every 1.5 meters.Technical specification table:
Contacta ahora
The CS14 Anchoring clamp pole clamp bracket is made of high strength alloy aluminum. The anchor pole clamp with stable quality, durable and long service life; neat and burr-free; simplify operation, convenient and easy to use. It is used on poles, in alignment or angle, different levels, also provide for hanging a public light bundle.Features:1. Package:125pieces2. Dimension: 45×38×23cm3. Material: high strength alloy aluminum
Contacta ahora
The cable hoop is a cable in the line to fix the pole. There are flat hoop, reinforced flat hoop, double hoop hoop and four hoop hoop. Generally, the specifications of flat steel and the diameter of the rods to be held are used to express its specifications, such as 60×6×150. Features: 1.
Contacta ahora
Features: anti-corrosion, anti-oxidation, long service life, high tensile strength, flexible and quick installation, etc. Uses: Traffic signs, advertising signs, cables, surveillance and other different areas. Measures:-Width: 19mm-Thickness: 0.7mm-Length: 50 m.
Contacta ahora
Universal pole bracket UPB is made of aluminum alloy with high mechanical strength. Its unique design has been engineered so to offer an universal pole hardware solution able to adapt to all cable installation configurations on wooden, concrete or metal poles.Features: Working load: 5KNUnit weight:220gCarton size: 420×280×230mmQuantity per carton : 50 piecesMaterial: aluminum alloyDelivery time: 10 daysDrawing: Packing: 50 pieces per carton
Contacta ahora
Stainless steel split pins are mostly used to prevent loosening or to lock parts, and are usually used in the tail holes of bolts or studs. The diameters of split pins for bolts of different specifications are also different.
Contacta ahora
1.Product name: tooth-shaped stainless steel cable tie buckle 2.Material: 316/304 stainless steel, with good and corrosion resistance.
Contacta ahora
A hoop is a component that uses one material to hug or hoop another material, which is a fastener. There are many types of hoops, cable hoops, telegraph pole hoops, cable hoops, cable hoops, and stainless steel hoops are more commonly used.Technical specification table:
Contacta ahora
UPB optical cable suspension bracket is a common product for FTTH accessories. The material is aluminum. It is suitable for communication optical fiber engineering dedicated to No. 8 optical cable. It is exported to South America, Southeast Asia, North America, the Middle East and other countries and regions.Features: Dimension: 120×113×45mmUnit weight:210gCarton size: 420×280×230mmQuantity per carton : 50 piecesMaterial: alloyDimension image: Packing image:
Contacta ahora